Difficulty

Easy

Steps

15

Time Required

                          10 minutes

Sections

2

  • Back Casing
  • 7 steps
  • Front Casing
  • 8 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSony Cyber-shot DSC-W150

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Casing
  • The screws from the camera are extremely small, so it is a good idea to have a small container to hold all the screws as you remove them.

The screws from the camera are extremely small, so it is a good idea to have a small container to hold all the screws as you remove them.

1024

Step 2

  • Take your screwdriver and remove the four silver bottom screws of the camera.
  • The picture shows the lens facing away from you and the LCD facing you.

Take your screwdriver and remove the four silver bottom screws of the camera.

The picture shows the lens facing away from you and the LCD facing you.

Step 3

  • On the right side of the camera, remove the two silver screws using the screwdriver.
  • The picture shows the lens facing away from you and the LCD screen facing you.

On the right side of the camera, remove the two silver screws using the screwdriver.

The picture shows the lens facing away from you and the LCD screen facing you.

Step 4

  • On the left side of the camera, remove the two silver screws using the screwdriver.
  • The picture shows the lens facing away from you and the LCD screen facing you.

On the left side of the camera, remove the two silver screws using the screwdriver.

Step 5

  • Gently detach the back cover by holding onto both sides of the camera and pulling them apart.

Gently detach the back cover by holding onto both sides of the camera and pulling them apart.

Step 6

  • After detaching the back cover, carefully pull it off.

After detaching the back cover, carefully pull it off.

Step 7

  • The back cover should now be separated from the camera.

The back cover should now be separated from the camera.

Step 8

              Front Casing
  • Keep track of the small screws that you remove.
  • Opening, removing, and/or replacing the front casing may void your manufacturer’s warranty.

Keep track of the small screws that you remove.

Opening, removing, and/or replacing the front casing may void your manufacturer’s warranty.

Step 9

  • Remove the two screws at the top of the camera casing.

Remove the two screws at the top of the camera casing.

Step 10

  • After removing the screws, gently pop open the plastic piece, as shown by firmly pulling it with your fingers.

After removing the screws, gently pop open the plastic piece, as shown by firmly pulling it with your fingers.

Step 11

  • After popping open the plastic piece, there is a screw that needs to be removed.
  • Remove the screw connecting the front casing to the electrical components.

After popping open the plastic piece, there is a screw that needs to be removed.

Remove the screw connecting the front casing to the electrical components.

Step 12

  • On the casing on the opposite side of the camera, gently loosen and remove the casing by firmly pulling with your fingers.
  • Be cautious not to break the fragile pieces or scratch the LCD screen.

On the casing on the opposite side of the camera, gently loosen and remove the casing by firmly pulling with your fingers.

Be cautious not to break the fragile pieces or scratch the LCD screen.

Step 13

  • Remove the two screws connecting the front casing to the electrical components using a screwdriver.

Remove the two screws connecting the front casing to the electrical components using a screwdriver.

Step 14

  • Gently loosen the front casing by gently using your fingers to pull it apart.
  • Be cautious not to scratch any of the exposed electrical components.

Gently loosen the front casing by gently using your fingers to pull it apart.

Be cautious not to scratch any of the exposed electrical components.

Step 15

  • Fully remove the front casing from the camera and set it aside.

Fully remove the front casing from the camera and set it aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 7 other contributors 


                    Julio Maravilla

Member since: 04/15/2010

191 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 33-73, Johann Spring 2010                        

                                                  Member of Cal Poly, Team 33-73, Johann Spring 2010 



                    CPSU-JOHANN-S10S33G73                     


                                            3 Members                     


                                            2 Guides authored