Difficulty
Easy
Steps
10
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Outer Casing
- 8 steps
Flags
0
BackSony Cyber-shot DSC-W290
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Find the hatch labeled “open” on the left side of the bottom of the camera.
- Slide the hatch in the direction that the arrow is pointing. The hatch will open outward on its own.
Find the hatch labeled “open” on the left side of the bottom of the camera.
Slide the hatch in the direction that the arrow is pointing. The hatch will open outward on its own.
1024
Step 2
- Slide the blue locking tab to release the battery.
- Slide the battery out of the camera.
Slide the blue locking tab to release the battery.
Slide the battery out of the camera.
Step 3
Outer Casing
- Replace hatch and rotate camera 180 degrees. You should still be looking at the bottom of the camera.
- Remove the four 2.5mm Phillips #0 screws.
Replace hatch and rotate camera 180 degrees. You should still be looking at the bottom of the camera.
Remove the four 2.5mm Phillips #0 screws.
Step 4
- Turn the camera so the left side-panel reading “5x Optical Zoom” faces you.
- Remove the two 2.5mm Phillips #0 screws.
- You may have to remove the screws with a pair of tweezers when the screws are almost out.
Turn the camera so the left side-panel reading “5x Optical Zoom” faces you.
Remove the two 2.5mm Phillips #0 screws.
You may have to remove the screws with a pair of tweezers when the screws are almost out.
Step 5
- Turn the camera so the right side faces you.
- Remove the two 2.5mm Phillips #0 screws.
- You may have to remove the screws with a pair of tweezers when the screws are almost out.
Turn the camera so the right side faces you.
Step 6
- Rotate camera so that the back is facing you.
- Pull the back casing directly away from the LCD screen.
Rotate camera so that the back is facing you.
Pull the back casing directly away from the LCD screen.
Step 7
- Turn the camera so that the left side is facing you.
- Pull the left side-panel off of the camera.
Turn the camera so that the left side is facing you.
Pull the left side-panel off of the camera.
Step 8
- Turn camera so that the front of the camera is facing you.
- Pull the front casing directly away from the camera.
- The right side panel may fall off when you take the front panel off.
Turn camera so that the front of the camera is facing you.
Pull the front casing directly away from the camera.
The right side panel may fall off when you take the front panel off.
Step 9
- Turn the camera so that the right side is facing you.
- Pull the right side-panel away from the rest of the camera.
Turn the camera so that the right side is facing you.
Pull the right side-panel away from the rest of the camera.
Step 10
- This is what your camera should look like now that you have removed the casing from all sides.
This is what your camera should look like now that you have removed the casing from all sides.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Evan Mayer
Member since: 10/05/2010
318 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 7-54, Amido Fall 2010
Member of Cal Poly, Team 7-54, Amido Fall 2010
CPSU-AMIDO-F10S7G54
4 Members
16 Guides authored
